Re: Non-text mode for pg_dumpall

Hi Mahendra,

Thank you for your work on this feature.
I have just begun reviewing the latest patch and
encountered the following errors during the initial setup:

```
$ ./db/bin/pg_restore testdump_dir -C -d postgres -F d -p 5556
pg_restore: error: could not execute query: ERROR: syntax error at or near
"\\"
LINE 1: \restrict aO9K1gzVZTlafidF5fWx8ADGzUnIiAcguFz5qskGaFDygTCjCj...
^
Command was: \restrict
aO9K1gzVZTlafidF5fWx8ADGzUnIiAcguFz5qskGaFDygTCjCj9vg3Xxys1b3hb

pg_restore: error: could not execute query: ERROR: syntax error at or near
"\\"
LINE 1: \unrestrict aO9K1gzVZTlafidF5fWx8ADGzUnIiAcguFz5qskGaFDygTCj...
^
Command was: \unrestrict
aO9K1gzVZTlafidF5fWx8ADGzUnIiAcguFz5qskGaFDygTCjCj9vg3Xxys1b3hb

pg_restore: error: could not execute query: ERROR: syntax error at or near
"\\"
LINE 1: \connect template1
^
Command was: \connect template1

pg_restore: error: could not execute query: ERROR: syntax error at or near
"\\"
LINE 1: \connect postgres
^
Command was: \connect postgres
```
To cross-check tried with plain dump(with pg_dumpall) and
restored(SQL file restore) without patch and didn't get above
connection errors.

It appears there might be an issue with the dump file itself.
Please note that this is my first observation as I have just
started the review. I will continue with my assessment.

Regards,
Vaibhav Dalvi
EnterpriseDB

On Fri, Oct 31, 2025 at 2:51 PM Mahendra Singh Thalor <mahi6run(at)gmail(dot)com>
wrote:

> On Tue, 28 Oct 2025 at 11:32, Mahendra Singh Thalor <mahi6run(at)gmail(dot)com>
> wrote:
> >
> > On Thu, 16 Oct 2025 at 16:24, Mahendra Singh Thalor <mahi6run(at)gmail(dot)com>
> wrote:
> > >
> > > On Wed, 15 Oct 2025 at 23:05, Mahendra Singh Thalor <
> mahi6run(at)gmail(dot)com> wrote:
> > > >
> > > > On Sun, 24 Aug 2025 at 22:12, Andrew Dunstan <andrew(at)dunslane(dot)net>
> wrote:
> > > > >
> > > > >
> > > > > On 2025-08-23 Sa 9:08 PM, Noah Misch wrote:
> > > > >
> > > > > On Wed, Jul 30, 2025 at 02:51:59PM -0400, Andrew Dunstan wrote:
> > > > >
> > > > > OK, now that's reverted we should discuss how to proceed. I had
> two thoughts
> > > > > - we could use invent a JSON format for the globals, or we could
> just use
> > > > > the existing archive format. I think the archive format is pretty
> flexible,
> > > > > and should be able to accommodate this. The downside is it's not
> humanly
> > > > > readable. The upside is that we don't need to do anything special
> either to
> > > > > write it or parse it.
> > > > >
> > > > > I would first try to use the existing archiver API, because that
> makes it
> > > > > harder to miss bugs. Any tension between that API and pg_dumpall
> is likely to
> > > > > have corresponding tension on the pg_restore side. Resolving that
> tension
> > > > > will reveal much of the project's scope that remained hidden
> during the v18
> > > > > attempt. Perhaps more important than that, using the archiver API
> means
> > > > > future pg_dump and pg_restore options are more likely to cooperate
> properly
> > > > > with $SUBJECT. In other words, I want it to be hard to add
> pg_dump/pg_restore
> > > > > features that malfunction only for $SUBJECT archives. The
> strength of the
> > > > > archiver architecture shows in how rarely new features need
> format-specific
> > > > > logic and how rarely format-specific bugs get reported. We've had
> little or
> > > > > no trouble with e.g. bugs that appear in -Fd but not in -Fc.
> > > > >
> > > > >
> > > > > Yeah, that's what we're going to try.
> > > > >
> > > > >
> > > > > cheers
> > > > >
> > > > >
> > > > > andrew
> > > > >
> > > > > --
> > > > > Andrew Dunstan
> > > > > EDB: https://www.enterprisedb.com
> > > >
> > > > Thanks Andrew, Noah and all others for feedback.
> > > >
> > > > Based on the above suggestions and discussions, I removed sql
> commands
> > > > from the global.dat file. For global commands, now we are making
> > > > toc.dat/toc.dmp/toc.tar file based on format specified and based on
> > > > format specified, we are making archive entries for these global
> > > > commands. By this approach, we removed the hard-coded parsing part of
> > > > the global.dat file and we are able to skip DROP DATABASE with the
> > > > globals-only option.
> > > >
> > > > Here, I am attaching a patch for review, testing and feedback. This
> is
> > > > a WIP patch. I will do some more code cleanup and will add some more
> > > > comments also. Please review this and let me know design level
> > > > feedback. Thanks Tushar Ahuja for some internal testing and feedback.
> > > >
> > >
> > > Hi,
> > > Here, I am attaching an updated patch. In offline discussion, Andrew
> > > reported some test-case failures(Thanks Andrew). I fixed those.
> > > Please let me know feedback for the patch.
> > >
> >
> > Hi,
> > Here I am attaching a re-based patch as v02 was failing on head.
> > Thanks Tushar for the testing.
> > Please review this and let me know feedback.
> >
>
> Hi all,
> Here I am attaching an updated patch for review and testing. Based on
> some offline comments by Andrew, I did some code cleanup.
> Please consider this patch for feedback.
>
> --
> Thanks and Regards
> Mahendra Singh Thalor
> EnterpriseDB: http://www.enterprisedb.com
>