Re: Server Hardware Configuration

From: "Michael D(dot) Sofka" <sofkam(at)rpi(dot)edu>
To: pgsql-admin(at)postgresql(dot)org
Subject: Re: Server Hardware Configuration
Date: 2005-11-21 20:36:24
Message-ID: 200511211536.24683.sofkam@rpi.edu
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-admin

On Monday 21 November 2005 12:12, you wrote:
> On Mon, Nov 21, 2005 at 09:41:36AM -0500, Michael D. Sofka wrote:
> You're talking about a 16G database that you expect to grow to 64G. That
> would fit happily in a RAID1 (mirror) of two SCSI 72G drives. I haven't
> priced that kind of stuff out recently, but I believe you're looking at
> $300-$500. If that doesn't provide enough performance, go to a RAID10
> and add more drives. If you're doing much writing at all, spring for a
> battery-backed controller so you can enable write caching.

More like $7k, till you add in the JBOD, the Perc card and 15,000 rpm
SCSI disks, with hot spars (the journal mirror goes on the same JBOD).
But you're right, we will have sufficient disks on the JBOD for RAID 1+0.

Mike

--
Michael D. Sofka sofkam(at)rpi(dot)edu
C&CT Sr. Systems Programmer Email, TeX, epistemology.
Rensselaer Polytechnic Institute, Troy, NY. http://www.rpi.edu/~sofkam/

In response to

Browse pgsql-admin by date

  From Date Subject
Next Message Qingqing Zhou 2005-11-21 21:07:43 Re: [ADMIN] ERROR: could not read block
Previous Message Joe Conway 2005-11-21 19:15:51 Re: Indexing array columns.