Client authentication is controlled by a configuration file,
which traditionally is named
pg_hba.conf and is stored in the database
cluster's data directory. (HBA
stands for host-based authentication.) A default
pg_hba.conf file is installed when the data
directory is initialized by
is possible to place the authentication configuration file
elsewhere, however; see the hba_file
The general format of the
pg_hba.conf file is a set of records, one per
line. Blank lines are ignored, as is any text after the
# comment character. Records cannot be
continued across lines. A record is made up of a number of fields
which are separated by spaces and/or tabs. Fields can contain white
space if the field value is double-quoted. Quoting one of the
keywords in a database, user, or address field (e.g.,
makes the word lose its special meaning, and just match a database,
user, or host with that name.
Each record specifies a connection type, a client IP address range (if relevant for the connection type), a database name, a user name, and the authentication method to be used for connections matching these parameters. The first record with a matching connection type, client address, requested database, and user name is used to perform authentication. There is no “fall-through” or “backup”: if one record is chosen and the authentication fails, subsequent records are not considered. If no record matches, access is denied.
A record can have one of the seven formats
The meaning of the fields is as follows:
This record matches connection attempts using Unix-domain sockets. Without a record of this type, Unix-domain socket connections are disallowed.
This record matches connection attempts made using TCP/IP.
host records match either
SSL or non-SSL connection attempts.
Remote TCP/IP connections will not be possible unless the server
is started with an appropriate value for the listen_addresses
configuration parameter, since the default behavior is to listen
for TCP/IP connections only on the local loopback address
This record matches connection attempts made using TCP/IP, but only when the connection is made with SSL encryption.
To make use of this option the server must be built with
SSL support. Furthermore,
SSL must be enabled by setting
the ssl configuration
parameter (see Section 18.9
for more information). Otherwise, the
hostssl record is ignored except for logging a
warning that it cannot match any connections.
This record type has the opposite behavior of
hostssl; it only matches connection attempts made
over TCP/IP that do not use SSL.
Specifies which database name(s) this record matches. The value
all specifies that it matches all
databases. The value
specifies that the record matches if the requested database has the
same name as the requested user. The value
samerole specifies that the requested user must be
a member of the role with the same name as the requested database.
samegroup is an obsolete but still
accepted spelling of
Superusers are not considered to be members of a role for the
samerole unless they are
explicitly members of the role, directly or indirectly, and not
just by virtue of being a superuser. The value
replication specifies that the record matches if a
physical replication connection is requested (note that replication
connections do not specify any particular database). Otherwise,
this is the name of a specific PostgreSQL database. Multiple database names
can be supplied by separating them with commas. A separate file
containing database names can be specified by preceding the file
Specifies which database user name(s) this record matches. The
all specifies that it matches
all users. Otherwise, this is either the name of a specific
database user, or a group name preceded by
+. (Recall that there is no real distinction
between users and groups in PostgreSQL; a
mark really means “match
any of the roles that are directly or indirectly members of this
role”, while a name without a
+ mark matches only that specific role.) For this
purpose, a superuser is only considered to be a member of a role if
they are explicitly a member of the role, directly or indirectly,
and not just by virtue of being a superuser. Multiple user names
can be supplied by separating them with commas. A separate file
containing user names can be specified by preceding the file name
Specifies the client machine address(es) that this record matches. This field can contain either a host name, an IP address range, or one of the special key words mentioned below.
An IP address range is specified using standard numeric notation
for the range's starting address, then a slash (
/) and a CIDR
mask length. The mask length indicates the number of high-order
bits of the client IP address that must match. Bits to the right of
this should be zero in the given IP address. There must not be any
white space between the IP address, the
/, and the CIDR mask length.
Typical examples of an IPv4 address range specified this way are
172.20.143.89/32 for a single host, or
172.20.143.0/24 for a small network,
10.6.0.0/16 for a larger one. An
IPv6 address range might look like
::1/128 for a single host (in this case the IPv6
loopback address) or
fe80::7a31:c1ff:0000:0000/96 for a small network.
0.0.0.0/0 represents all IPv4
::0/0 represents all
IPv6 addresses. To specify a single host, use a mask length of 32
for IPv4 or 128 for IPv6. In a network address, do not omit
An entry given in IPv4 format will match only IPv4 connections, and an entry given in IPv6 format will match only IPv6 connections, even if the represented address is in the IPv4-in-IPv6 range. Note that entries in IPv6 format will be rejected if the system's C library does not have support for IPv6 addresses.
You can also write
all to match any
samehost to match any of
the server's own IP addresses, or
samenet to match any address in any subnet that
the server is directly connected to.
If a host name is specified (anything that is not an IP address
range or a special key word is treated as a host name), that name
is compared with the result of a reverse name resolution of the
client's IP address (e.g., reverse DNS lookup, if DNS is used).
Host name comparisons are case insensitive. If there is a match,
then a forward name resolution (e.g., forward DNS lookup) is
performed on the host name to check whether any of the addresses it
resolves to are equal to the client's IP address. If both
directions match, then the entry is considered to match. (The host
name that is used in
should be the one that address-to-name resolution of the client's
IP address returns, otherwise the line won't be matched. Some host
name databases allow associating an IP address with multiple host
names, but the operating system will only return one host name when
asked to resolve an IP address.)
A host name specification that starts with a dot (
.) matches a suffix of the actual host name. So
.example.com would match
foo.example.com (but not just
When host names are specified in
pg_hba.conf, you should make sure that name
resolution is reasonably fast. It can be of advantage to set up a
local name resolution cache such as
nscd. Also, you may wish to enable the
to see the client's host name instead of the IP address in the
This field only applies to
Users sometimes wonder why host names are handled in this
seemingly complicated way, with two name resolutions including a
reverse lookup of the client's IP address. This complicates use of
the feature in case the client's reverse DNS entry is not set up or
yields some undesirable host name. It is done primarily for
efficiency: this way, a connection attempt requires at most two
resolver lookups, one reverse and one forward. If there is a
resolver problem with some address, it becomes only that client's
problem. A hypothetical alternative implementation that only did
forward lookups would have to resolve every host name mentioned in
pg_hba.conf during every connection
attempt. That could be quite slow if many names are listed. And if
there is a resolver problem with one of the host names, it becomes
Also, a reverse lookup is necessary to implement the suffix matching feature, because the actual client host name needs to be known in order to match it against the pattern.
Note that this behavior is consistent with other popular implementations of host name-based access control, such as the Apache HTTP Server and TCP Wrappers.
These two fields can be used as an alternative to the
mask-length notation. Instead of
specifying the mask length, the actual mask is specified in a
separate column. For example,
255.0.0.0 represents an IPv4 CIDR mask length of
255.255.255.255 represents a
CIDR mask length of 32.
These fields only apply to
Specifies the authentication method to use when a connection matches this record. The possible choices are summarized here; details are in Section 20.3.
Allow the connection unconditionally. This method allows anyone that can connect to the PostgreSQL database server to login as any PostgreSQL user they wish, without the need for a password or any other authentication. See Section 20.3.1 for details.
Reject the connection unconditionally. This is useful for
out” certain hosts from a group, for example a
reject line could block a specific
host from connecting, while a later line allows the remaining hosts
in a specific network to connect.
Perform SCRAM-SHA-256 authentication to verify the user's password. See Section 20.3.2 for details.
Perform SCRAM-SHA-256 or MD5 authentication to verify the user's password. See Section 20.3.2 for details.
Require the client to supply an unencrypted password for authentication. Since the password is sent in clear text over the network, this should not be used on untrusted networks. See Section 20.3.2 for details.
Use GSSAPI to authenticate the user. This is only available for TCP/IP connections. See Section 20.3.3 for details.
Use SSPI to authenticate the user. This is only available on Windows. See Section 20.3.4 for details.
Obtain the operating system user name of the client by contacting the ident server on the client and check if it matches the requested database user name. Ident authentication can only be used on TCP/IP connections. When specified for local connections, peer authentication will be used instead. See Section 20.3.5 for details.
Obtain the client's operating system user name from the operating system and check if it matches the requested database user name. This is only available for local connections. See Section 20.3.6 for details.
Authenticate using an LDAP server. See Section 20.3.7 for details.
Authenticate using a RADIUS server. See Section 20.3.8 for details.
Authenticate using SSL client certificates. See Section 20.3.9 for details.
Authenticate using the Pluggable Authentication Modules (PAM) service provided by the operating system. See Section 20.3.10 for details.
Authenticate using the BSD Authentication service provided by the operating system. See Section 20.3.11 for details.
field, there can be field(s) of the form
that specify options for the authentication method. Details about
which options are available for which authentication methods appear
In addition to the method-specific options listed below, there
is one method-independent authentication option
clientcert, which can be specified in any
hostssl record. When set to
1, this option requires the client to
present a valid (trusted) SSL certificate, in addition to the other
requirements of the authentication method.
Files included by
@ constructs are
read as lists of names, which can be separated by either whitespace
or commas. Comments are introduced by
#, just as in
pg_hba.conf, and nested
@ constructs are allowed. Unless the file name
@ is an absolute path, it is
taken to be relative to the directory containing the referencing
pg_hba.conf records are
examined sequentially for each connection attempt, the order of the
records is significant. Typically, earlier records will have tight
connection match parameters and weaker authentication methods,
while later records will have looser match parameters and stronger
authentication methods. For example, one might wish to use
trust authentication for local TCP/IP
connections but require a password for remote TCP/IP connections.
In this case a record specifying
authentication for connections from 127.0.0.1 would appear before a
record specifying password authentication for a wider range of
allowed client IP addresses.
pg_hba.conf file is read on
start-up and when the main server process receives a SIGHUP signal. If you edit the file on an active system,
you will need to signal the postmaster (using
pg_ctl reload or
-HUP) to make it re-read the file.
The preceding statement is not true on Microsoft Windows: there,
any changes in the
are immediately applied by subsequent new connections.
The system view
pg_hba_file_rules can be helpful for
pre-testing changes to the
pg_hba.conf file, or for diagnosing problems if
loading of the file did not have the desired effects. Rows in the
view with non-null
indicate problems in the corresponding lines of the file.
To connect to a particular database, a user must not only pass
pg_hba.conf checks, but must have
CONNECT privilege for the
database. If you wish to restrict which users can connect to which
databases, it's usually easier to control this by granting/revoking
CONNECT privilege than to put the
Some examples of
entries are shown in Example 20.1.
See the next section for details on the different authentication
Example 20.1. Example
# Allow any user on the local system to connect to any database with # any database user name using Unix-domain sockets (the default for local # connections). # # TYPE DATABASE USER ADDRESS METHOD local all all trust # The same using local loopback TCP/IP connections. # # TYPE DATABASE USER ADDRESS METHOD host all all 127.0.0.1/32 trust # The same as the previous line, but using a separate netmask column # # TYPE DATABASE USER IP-ADDRESS IP-MASK METHOD host all all 127.0.0.1 255.255.255.255 trust # The same over IPv6. # # TYPE DATABASE USER ADDRESS METHOD host all all ::1/128 trust # The same using a host name (would typically cover both IPv4 and IPv6). # # TYPE DATABASE USER ADDRESS METHOD host all all localhost trust # Allow any user from any host with IP address 192.168.93.x to connect # to database "postgres" as the same user name that ident reports for # the connection (typically the operating system user name). # # TYPE DATABASE USER ADDRESS METHOD host postgres all 192.168.93.0/24 ident # Allow any user from host 192.168.12.10 to connect to database # "postgres" if the user's password is correctly supplied. # # TYPE DATABASE USER ADDRESS METHOD host postgres all 192.168.12.10/32 scram-sha-256 # Allow any user from hosts in the example.com domain to connect to # any database if the user's password is correctly supplied. # # Require SCRAM authentication for most users, but make an exception # for user 'mike', who uses an older client that doesn't support SCRAM # authentication. # # TYPE DATABASE USER ADDRESS METHOD host all mike .example.com md5 host all all .example.com scram-sha-256 # In the absence of preceding "host" lines, these two lines will # reject all connections from 192.168.54.1 (since that entry will be # matched first), but allow GSSAPI connections from anywhere else # on the Internet. The zero mask causes no bits of the host IP # address to be considered, so it matches any host. # # TYPE DATABASE USER ADDRESS METHOD host all all 192.168.54.1/32 reject host all all 0.0.0.0/0 gss # Allow users from 192.168.x.x hosts to connect to any database, if # they pass the ident check. If, for example, ident says the user is # "bryanh" and he requests to connect as PostgreSQL user "guest1", the # connection is allowed if there is an entry in pg_ident.conf for map # "omicron" that says "bryanh" is allowed to connect as "guest1". # # TYPE DATABASE USER ADDRESS METHOD host all all 192.168.0.0/16 ident map=omicron # If these are the only three lines for local connections, they will # allow local users to connect only to their own databases (databases # with the same name as their database user name) except for administrators # and members of role "support", who can connect to all databases. The file # $PGDATA/admins contains a list of names of administrators. Passwords # are required in all cases. # # TYPE DATABASE USER ADDRESS METHOD local sameuser all md5 local all @admins md5 local all +support md5 # The last two lines above can be combined into a single line: local all @admins,+support md5 # The database column can also use lists and file names: local db1,db2,@demodbs all md5
If you see anything in the documentation that is not correct, does not match your experience with the particular feature or requires further clarification, please use this form to report a documentation issue.