Re: Bad RAID1 read performance

From: Albert Cervera Areny <albert(at)sedifa(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Cc: "Luke Lonergan" <llonergan(at)greenplum(dot)com>
Subject: Re: Bad RAID1 read performance
Date: 2007-05-30 15:00:26
Message-ID: 200705301700.26704.albert@sedifa.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-performance

Hardware isn't very good I believe, and it's about 2-3 years old, but the RAID
is Linux software, and though not very good the difference between reading
and writing should probably be greater... (?)

Would you set 512Kb readahead on both drives and RAID? I tried various
configurations and none seemed to make a big difference. It seemed correct to
me to set 512kb per drive and 1024kb for md0.

A Dimecres 30 Maig 2007 16:09, Luke Lonergan va escriure:
> This sounds like a bad RAID controller - are you using a built-in hardware
> RAID? If so, you will likely want to use Linux software RAID instead.
>
> Also - you might want to try a 512KB readahead - I've found that is optimal
> for RAID1 on some RAID controllers.
>
> - Luke
>
> On 5/30/07 2:35 AM, "Albert Cervera Areny" <albert(at)sedifa(dot)com> wrote:
> > Hi,
> > after doing the "dd" tests for a server we have at work I obtained:
> > Read: 47.20 Mb/s
> > Write: 39.82 Mb/s
> > Some days ago read performance was around 20Mb/s due to no readahead in
> > md0 so I modified it using hdparm. However, it seems to me that being it
> > a RAID1 read speed could be much better. These are SATA disks with 3Gb of
> > RAM so I did 'time bash -c "dd if=/dev/zero of=bigfile bs=8k count=786432
> > && sync"'. File system is ext3 (if read many times in the list that XFS
> > is faster), but I don't want to change the file system right now.
> > Modifing the readahead from the current 1024k to 2048k doesn't make any
> > difference. Are there any other tweaks I can make?
> >
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 4: Have you searched our list archives?
> >
> > http://archives.postgresql.org
>
> ---------------------------(end of broadcast)---------------------------
> TIP 6: explain analyze is your friend

--
Albert Cervera Areny
Dept. Informàtica Sedifa, S.L.

Av. Can Bordoll, 149
08202 - Sabadell (Barcelona)
Tel. 93 715 51 11
Fax. 93 715 51 12

====================================================================
........................ AVISO LEGAL ............................
La presente comunicación y sus anexos tiene como destinatario la
persona a la que va dirigida, por lo que si usted lo recibe
por error debe notificarlo al remitente y eliminarlo de su
sistema, no pudiendo utilizarlo, total o parcialmente, para
ningún fin. Su contenido puede tener información confidencial o
protegida legalmente y únicamente expresa la opinión del
remitente. El uso del correo electrónico vía Internet no
permite asegurar ni la confidencialidad de los mensajes
ni su correcta recepción. En el caso de que el
destinatario no consintiera la utilización del correo electrónico,
deberá ponerlo en nuestro conocimiento inmediatamente.
====================================================================
........................... DISCLAIMER .............................
This message and its attachments are intended exclusively for the
named addressee. If you receive this message in error, please
immediately delete it from your system and notify the sender. You
may not use this message or any part of it for any purpose.
The message may contain information that is confidential or
protected by law, and any opinions expressed are those of the
individual sender. Internet e-mail guarantees neither the
confidentiality nor the proper receipt of the message sent.
If the addressee of this message does not consent to the use
of internet e-mail, please inform us inmmediately.
====================================================================

In response to

Responses

Browse pgsql-performance by date

  From Date Subject
Next Message Michael Stone 2007-05-30 15:09:30 Re: setting up raid10 with more than 4 drives
Previous Message Luke Lonergan 2007-05-30 14:36:48 Re: setting up raid10 with more than 4 drives