From c5188910213699db4dcf201b2f854e825703f222 Mon Sep 17 00:00:00 2001 From: Michael Paquier Date: Tue, 4 Oct 2016 14:41:15 +0900 Subject: [PATCH 2/2] Rename pg_clog to pg_xact pg_upgrade is updated to handle the transfer correctly to post-10 clusters. --- doc/src/sgml/backup.sgml | 4 ++-- doc/src/sgml/catalogs.sgml | 4 ++-- doc/src/sgml/config.sgml | 2 +- doc/src/sgml/func.sgml | 2 +- doc/src/sgml/maintenance.sgml | 8 ++++---- doc/src/sgml/ref/pg_resetxlog.sgml | 4 ++-- doc/src/sgml/ref/pg_rewind.sgml | 2 +- doc/src/sgml/storage.sgml | 10 +++++----- doc/src/sgml/wal.sgml | 2 +- src/backend/access/heap/heapam.c | 4 ++-- src/backend/access/transam/README | 10 +++++----- src/backend/access/transam/clog.c | 2 +- src/backend/access/transam/commit_ts.c | 2 +- src/backend/access/transam/multixact.c | 2 +- src/backend/access/transam/subtrans.c | 5 ++--- src/backend/access/transam/transam.c | 2 +- src/backend/access/transam/twophase.c | 4 ++-- src/backend/access/transam/xact.c | 16 ++++++++-------- src/backend/access/transam/xlog.c | 2 +- src/backend/commands/vacuum.c | 10 +++++----- src/backend/postmaster/autovacuum.c | 2 +- src/backend/storage/buffer/README | 2 +- src/backend/storage/ipc/procarray.c | 4 ++-- src/backend/utils/time/tqual.c | 6 +++--- src/bin/initdb/initdb.c | 2 +- src/bin/pg_upgrade/exec.c | 6 ++++++ src/bin/pg_upgrade/pg_upgrade.c | 30 ++++++++++++++++++------------ src/include/access/slru.h | 4 ++-- 28 files changed, 82 insertions(+), 71 deletions(-) diff --git a/doc/src/sgml/backup.sgml b/doc/src/sgml/backup.sgml index 6eaed1e..d22af0d 100644 --- a/doc/src/sgml/backup.sgml +++ b/doc/src/sgml/backup.sgml @@ -382,10 +382,10 @@ tar -cf backup.tar /usr/local/pgsql/data directories. This will not work because the information contained in these files is not usable without the commit log files, - pg_clog/*, which contain the commit status of + pg_xact/*, which contain the commit status of all transactions. A table file is only usable with this information. Of course it is also impossible to restore only a - table and the associated pg_clog data + table and the associated pg_xact data because that would render all other tables in the database cluster useless. So file system backups only work for complete backup and restoration of an entire database cluster. diff --git a/doc/src/sgml/catalogs.sgml b/doc/src/sgml/catalogs.sgml index 29738b0..839b52a 100644 --- a/doc/src/sgml/catalogs.sgml +++ b/doc/src/sgml/catalogs.sgml @@ -1847,7 +1847,7 @@ All transaction IDs before this one have been replaced with a permanent (frozen) transaction ID in this table. This is used to track whether the table needs to be vacuumed in order to prevent transaction - ID wraparound or to allow pg_clog to be shrunk. Zero + ID wraparound or to allow pg_xact to be shrunk. Zero (InvalidTransactionId) if the relation is not a table. @@ -2514,7 +2514,7 @@ All transaction IDs before this one have been replaced with a permanent (frozen) transaction ID in this database. This is used to track whether the database needs to be vacuumed in order to prevent - transaction ID wraparound or to allow pg_clog to be shrunk. + transaction ID wraparound or to allow pg_xact to be shrunk. It is the minimum of the per-table pg_class.relfrozenxid values. diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 1bb501c..3e6296e 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -5822,7 +5822,7 @@ COPY postgres_log FROM '/full/path/to/logfile.csv' WITH csv; Vacuum also allows removal of old files from the - pg_clog subdirectory, which is why the default + pg_xact subdirectory, which is why the default is a relatively low 200 million transactions. This parameter can only be set at server start, but the setting can be reduced for individual tables by diff --git a/doc/src/sgml/func.sgml b/doc/src/sgml/func.sgml index 2e64cc4..e9cfb06 100644 --- a/doc/src/sgml/func.sgml +++ b/doc/src/sgml/func.sgml @@ -15323,7 +15323,7 @@ SELECT * FROM pg_ls_dir('.') WITH ORDINALITY AS t(ls,n); postmaster.pid | 9 pg_ident.conf | 10 global | 11 - pg_clog | 12 + pg_xact | 12 pg_snapshots | 13 pg_multixact | 14 PG_VERSION | 15 diff --git a/doc/src/sgml/maintenance.sgml b/doc/src/sgml/maintenance.sgml index f87f3e0..65a64c8 100644 --- a/doc/src/sgml/maintenance.sgml +++ b/doc/src/sgml/maintenance.sgml @@ -527,18 +527,18 @@ The sole disadvantage of increasing autovacuum_freeze_max_age (and vacuum_freeze_table_age along with it) - is that the pg_clog subdirectory of the database cluster + is that the pg_xact subdirectory of the database cluster will take more space, because it must store the commit status of all transactions back to the autovacuum_freeze_max_age horizon. The commit status uses two bits per transaction, so if autovacuum_freeze_max_age is set to its maximum allowed - value of two billion, pg_clog can be expected to + value of two billion, pg_xact can be expected to grow to about half a gigabyte. If this is trivial compared to your total database size, setting autovacuum_freeze_max_age to its maximum allowed value is recommended. Otherwise, set it depending - on what you are willing to allow for pg_clog storage. + on what you are willing to allow for pg_xact storage. (The default, 200 million transactions, translates to about 50MB of - pg_clog storage.) + pg_xact storage.) diff --git a/doc/src/sgml/ref/pg_resetxlog.sgml b/doc/src/sgml/ref/pg_resetxlog.sgml index c949c5e..6ebc68b 100644 --- a/doc/src/sgml/ref/pg_resetxlog.sgml +++ b/doc/src/sgml/ref/pg_resetxlog.sgml @@ -256,12 +256,12 @@ PostgreSQL documentation A safe value can be determined by looking for the numerically largest - file name in the directory pg_clog under the data directory, + file name in the directory pg_xact under the data directory, adding one, and then multiplying by 1048576 (0x100000). Note that the file names are in hexadecimal. It is usually easiest to specify the option value in hexadecimal too. For example, if 0011 is the largest entry - in pg_clog, -x 0x1200000 will work (five + in pg_xact, -x 0x1200000 will work (five trailing zeroes provide the proper multiplier). diff --git a/doc/src/sgml/ref/pg_rewind.sgml b/doc/src/sgml/ref/pg_rewind.sgml index 371c4a4..d5430d4 100644 --- a/doc/src/sgml/ref/pg_rewind.sgml +++ b/doc/src/sgml/ref/pg_rewind.sgml @@ -229,7 +229,7 @@ PostgreSQL documentation - Copy all other files such as pg_clog and + Copy all other files such as pg_xact and configuration files from the source cluster to the target cluster (everything except the relation files). diff --git a/doc/src/sgml/storage.sgml b/doc/src/sgml/storage.sgml index fddb69b..56aef3c 100644 --- a/doc/src/sgml/storage.sgml +++ b/doc/src/sgml/storage.sgml @@ -72,11 +72,6 @@ Item - pg_clog - Subdirectory containing transaction commit status data - - - pg_dynshmem Subdirectory containing files used by the dynamic shared memory subsystem @@ -146,6 +141,11 @@ Item + pg_xact + Subdirectory containing transaction commit status data + + + postgresql.auto.conf A file used for storing configuration parameters that are set by ALTER SYSTEM diff --git a/doc/src/sgml/wal.sgml b/doc/src/sgml/wal.sgml index 346aa76..1f9fac9 100644 --- a/doc/src/sgml/wal.sgml +++ b/doc/src/sgml/wal.sgml @@ -201,7 +201,7 @@ - Internal data structures such as pg_clog, pg_subtrans, pg_multixact, + Internal data structures such as pg_xact, pg_subtrans, pg_multixact, pg_serial, pg_notify, pg_stat, pg_snapshots are not directly checksummed, nor are pages protected by full page writes. However, where such data structures are persistent, WAL records are written that allow diff --git a/src/backend/access/heap/heapam.c b/src/backend/access/heap/heapam.c index b019bc1..560a8da 100644 --- a/src/backend/access/heap/heapam.c +++ b/src/backend/access/heap/heapam.c @@ -6762,8 +6762,8 @@ heap_prepare_freeze_tuple(HeapTupleHeader tuple, TransactionId cutoff_xid, * Note: it might seem we could make the changes without exclusive lock, since * TransactionId read/write is assumed atomic anyway. However there is a race * condition: someone who just fetched an old XID that we overwrite here could - * conceivably not finish checking the XID against pg_clog before we finish - * the VACUUM and perhaps truncate off the part of pg_clog he needs. Getting + * conceivably not finish checking the XID against pg_xact before we finish + * the VACUUM and perhaps truncate off the part of pg_xact he needs. Getting * exclusive lock ensures no other backend is in process of checking the * tuple status. Also, getting exclusive lock makes it safe to adjust the * infomask bits. diff --git a/src/backend/access/transam/README b/src/backend/access/transam/README index 4ae4715..e7dd19f 100644 --- a/src/backend/access/transam/README +++ b/src/backend/access/transam/README @@ -331,17 +331,17 @@ of the xid fields is atomic, so assuming it for xmin as well is no extra risk. -pg_clog and pg_subtrans +pg_xact and pg_subtrans ----------------------- -pg_clog and pg_subtrans are permanent (on-disk) storage of transaction related +pg_xact and pg_subtrans are permanent (on-disk) storage of transaction related information. There is a limited number of pages of each kept in memory, so in many cases there is no need to actually read from disk. However, if there's a long running transaction or a backend sitting idle with an open transaction, it may be necessary to be able to read and write this information from disk. They also allow information to be permanent across server restarts. -pg_clog records the commit status for each transaction that has been assigned +pg_xact records the commit status for each transaction that has been assigned an XID. A transaction can be in progress, committed, aborted, or "sub-committed". This last state means that it's a subtransaction that's no longer running, but its parent has not updated its state yet. It is not @@ -381,9 +381,9 @@ each transaction we keep a "cache" of Xids that are known to be part of the transaction tree, so we can skip looking at pg_subtrans unless we know the cache has been overflowed. See storage/ipc/procarray.c for the gory details. -slru.c is the supporting mechanism for both pg_clog and pg_subtrans. It +slru.c is the supporting mechanism for both pg_xact and pg_subtrans. It implements the LRU policy for in-memory buffer pages. The high-level routines -for pg_clog are implemented in transam.c, while the low-level functions are in +for pg_xact are implemented in transam.c, while the low-level functions are in clog.c. pg_subtrans is contained completely in subtrans.c. diff --git a/src/backend/access/transam/clog.c b/src/backend/access/transam/clog.c index 2634476..08e1edd 100644 --- a/src/backend/access/transam/clog.c +++ b/src/backend/access/transam/clog.c @@ -450,7 +450,7 @@ CLOGShmemInit(void) { ClogCtl->PagePrecedes = CLOGPagePrecedes; SimpleLruInit(ClogCtl, "clog", CLOGShmemBuffers(), CLOG_LSNS_PER_PAGE, - CLogControlLock, "pg_clog", LWTRANCHE_CLOG_BUFFERS); + CLogControlLock, "pg_xact", LWTRANCHE_CLOG_BUFFERS); } /* diff --git a/src/backend/access/transam/commit_ts.c b/src/backend/access/transam/commit_ts.c index a8d275f..0d03700 100644 --- a/src/backend/access/transam/commit_ts.c +++ b/src/backend/access/transam/commit_ts.c @@ -3,7 +3,7 @@ * commit_ts.c * PostgreSQL commit timestamp manager * - * This module is a pg_clog-like system that stores the commit timestamp + * This module is a pg_xact-like system that stores the commit timestamp * for each transaction. * * XLOG interactions: this module generates an XLOG record whenever a new diff --git a/src/backend/access/transam/multixact.c b/src/backend/access/transam/multixact.c index e9588a7..287e435 100644 --- a/src/backend/access/transam/multixact.c +++ b/src/backend/access/transam/multixact.c @@ -3,7 +3,7 @@ * multixact.c * PostgreSQL multi-transaction-log manager * - * The pg_multixact manager is a pg_clog-like manager that stores an array of + * The pg_multixact manager is a pg_xact-like manager that stores an array of * MultiXactMember for each MultiXactId. It is a fundamental part of the * shared-row-lock implementation. Each MultiXactMember is comprised of a * TransactionId and a set of flag bits. The name is a bit historical: diff --git a/src/backend/access/transam/subtrans.c b/src/backend/access/transam/subtrans.c index 908fe2d..6871239 100644 --- a/src/backend/access/transam/subtrans.c +++ b/src/backend/access/transam/subtrans.c @@ -3,15 +3,14 @@ * subtrans.c * PostgreSQL subtransaction-log manager * - * The pg_subtrans manager is a pg_clog-like manager that stores the parent + * The pg_subtrans manager is a pg_xact-like manager that stores the parent * transaction Id for each transaction. It is a fundamental part of the * nested transactions implementation. A main transaction has a parent * of InvalidTransactionId, and each subtransaction has its immediate parent. * The tree can easily be walked from child to parent, but not in the * opposite direction. * - * This code is based on clog.c, but the robustness requirements - * are completely different from pg_clog, because we only need to remember + * are completely different from pg_xact, because we only need to remember * pg_subtrans information for currently-open transactions. Thus, there is * no need to preserve data over a crash and restart. * diff --git a/src/backend/access/transam/transam.c b/src/backend/access/transam/transam.c index 1eba49a..0a103c3 100644 --- a/src/backend/access/transam/transam.c +++ b/src/backend/access/transam/transam.c @@ -224,7 +224,7 @@ TransactionIdDidAbort(TransactionId transactionId) * True iff transaction associated with the identifier is currently * known to have either committed or aborted. * - * This does NOT look into pg_clog but merely probes our local cache + * This does NOT look into pg_xact but merely probes our local cache * (and so it's not named TransactionIdDidComplete, which would be the * appropriate name for a function that worked that way). The intended * use is just to short-circuit TransactionIdIsInProgress calls when doing diff --git a/src/backend/access/transam/twophase.c b/src/backend/access/transam/twophase.c index 5415604..8bed3f5 100644 --- a/src/backend/access/transam/twophase.c +++ b/src/backend/access/transam/twophase.c @@ -1379,7 +1379,7 @@ FinishPreparedTransaction(const char *gid, bool isCommit) /* * The order of operations here is critical: make the XLOG entry for * commit or abort, then mark the transaction committed or aborted in - * pg_clog, then remove its PGPROC from the global ProcArray (which means + * pg_xact, then remove its PGPROC from the global ProcArray (which means * TransactionIdIsInProgress will stop saying the prepared xact is in * progress), then run the post-commit or post-abort callbacks. The * callbacks will release the locks the transaction held. @@ -2093,7 +2093,7 @@ RecordTransactionCommitPrepared(TransactionId xid, /* Flush XLOG to disk */ XLogFlush(recptr); - /* Mark the transaction committed in pg_clog */ + /* Mark the transaction committed in pg_xact */ TransactionIdCommitTree(xid, nchildren, children); /* Checkpoint can proceed now */ diff --git a/src/backend/access/transam/xact.c b/src/backend/access/transam/xact.c index e11b229..6d6b3e4 100644 --- a/src/backend/access/transam/xact.c +++ b/src/backend/access/transam/xact.c @@ -1206,8 +1206,8 @@ RecordTransactionCommit(void) /* * Mark ourselves as within our "commit critical section". This * forces any concurrent checkpoint to wait until we've updated - * pg_clog. Without this, it is possible for the checkpoint to set - * REDO after the XLOG record but fail to flush the pg_clog update to + * pg_xact. Without this, it is possible for the checkpoint to set + * REDO after the XLOG record but fail to flush the pg_xact update to * disk, leading to loss of the transaction commit if the system * crashes a little later. * @@ -2033,7 +2033,7 @@ CommitTransaction(void) if (!is_parallel_worker) { /* - * We need to mark our XIDs as committed in pg_clog. This is where we + * We need to mark our XIDs as committed in pg_xact. This is where we * durably commit. */ latestXid = RecordTransactionCommit(); @@ -4625,7 +4625,7 @@ AbortSubTransaction(void) s->parent->subTransactionId); AtSubAbort_Notify(); - /* Advertise the fact that we aborted in pg_clog. */ + /* Advertise the fact that we aborted in pg_xact. */ (void) RecordTransactionAbort(true); /* Post-abort cleanup */ @@ -5371,7 +5371,7 @@ xact_redo_commit(xl_xact_parsed_commit *parsed, if (standbyState == STANDBY_DISABLED) { /* - * Mark the transaction committed in pg_clog. + * Mark the transaction committed in pg_xact. */ TransactionIdCommitTree(xid, parsed->nsubxacts, parsed->subxacts); } @@ -5389,7 +5389,7 @@ xact_redo_commit(xl_xact_parsed_commit *parsed, RecordKnownAssignedTransactionIds(max_xid); /* - * Mark the transaction committed in pg_clog. We use async commit + * Mark the transaction committed in pg_xact. We use async commit * protocol during recovery to provide information on database * consistency for when users try to set hint bits. It is important * that we do not set hint bits until the minRecoveryPoint is past @@ -5526,7 +5526,7 @@ xact_redo_abort(xl_xact_parsed_abort *parsed, TransactionId xid) if (standbyState == STANDBY_DISABLED) { - /* Mark the transaction aborted in pg_clog, no need for async stuff */ + /* Mark the transaction aborted in pg_xact, no need for async stuff */ TransactionIdAbortTree(xid, parsed->nsubxacts, parsed->subxacts); } else @@ -5542,7 +5542,7 @@ xact_redo_abort(xl_xact_parsed_abort *parsed, TransactionId xid) */ RecordKnownAssignedTransactionIds(max_xid); - /* Mark the transaction aborted in pg_clog, no need for async stuff */ + /* Mark the transaction aborted in pg_xact, no need for async stuff */ TransactionIdAbortTree(xid, parsed->nsubxacts, parsed->subxacts); /* diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 4fda179..c754a91 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -8488,7 +8488,7 @@ CreateCheckPoint(int flags) * that are currently in commit critical sections. If an xact inserted * its commit record into XLOG just before the REDO point, then a crash * restart from the REDO point would not replay that record, which means - * that our flushing had better include the xact's update of pg_clog. So + * that our flushing had better include the xact's update of pg_xact. So * we wait till he's out of his commit critical section before proceeding. * See notes in RecordTransactionCommit(). * diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c index 58bbf55..d673031 100644 --- a/src/backend/commands/vacuum.c +++ b/src/backend/commands/vacuum.c @@ -356,7 +356,7 @@ vacuum(int options, RangeVar *relation, Oid relid, VacuumParams *params, if ((options & VACOPT_VACUUM) && !IsAutoVacuumWorkerProcess()) { /* - * Update pg_database.datfrozenxid, and truncate pg_clog if possible. + * Update pg_database.datfrozenxid, and truncate pg_xact if possible. * (autovacuum.c does this for itself.) */ vac_update_datfrozenxid(); @@ -880,7 +880,7 @@ vac_update_relstats(Relation relation, * pg_class.relminmxid values. * * If we are able to advance either pg_database value, also try to - * truncate pg_clog and pg_multixact. + * truncate pg_xact and pg_multixact. * * We violate transaction semantics here by overwriting the database's * existing pg_database tuple with the new values. This is reasonably @@ -1026,7 +1026,7 @@ vac_update_datfrozenxid(void) /* * If we were able to advance datfrozenxid or datminmxid, see if we can - * truncate pg_clog and/or pg_multixact. Also do it if the shared + * truncate pg_xact and/or pg_multixact. Also do it if the shared * XID-wrap-limit info is stale, since this action will update that too. */ if (dirty || ForceTransactionIdLimitUpdate()) @@ -1039,7 +1039,7 @@ vac_update_datfrozenxid(void) * vac_truncate_clog() -- attempt to truncate the commit log * * Scan pg_database to determine the system-wide oldest datfrozenxid, - * and use it to truncate the transaction commit log (pg_clog). + * and use it to truncate the transaction commit log (pg_xact). * Also update the XID wrap limit info maintained by varsup.c. * Likewise for datminmxid. * @@ -1086,7 +1086,7 @@ vac_truncate_clog(TransactionId frozenXID, * of the interlock against copying a DB containing an active backend. * Hence the new entry will not reduce the minimum. Also, if two VACUUMs * concurrently modify the datfrozenxid's of different databases, the - * worst possible outcome is that pg_clog is not truncated as aggressively + * worst possible outcome is that pg_xact is not truncated as aggressively * as it could be. */ relation = heap_open(DatabaseRelationId, AccessShareLock); diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c index e3a6911..29a555e 100644 --- a/src/backend/postmaster/autovacuum.c +++ b/src/backend/postmaster/autovacuum.c @@ -2395,7 +2395,7 @@ deleted: */ /* - * Update pg_database.datfrozenxid, and truncate pg_clog if possible. We + * Update pg_database.datfrozenxid, and truncate pg_xact if possible. We * only need to do this once, not after each table. */ vac_update_datfrozenxid(); diff --git a/src/backend/storage/buffer/README b/src/backend/storage/buffer/README index 248883f..bc80777 100644 --- a/src/backend/storage/buffer/README +++ b/src/backend/storage/buffer/README @@ -63,7 +63,7 @@ at about the same time would OR the same bits into the field, so there is little or no risk of conflicting update; what's more, if there did manage to be a conflict it would merely mean that one bit-update would be lost and need to be done again later. These four bits are only hints -(they cache the results of transaction status lookups in pg_clog), so no +(they cache the results of transaction status lookups in pg_xact), so no great harm is done if they get reset to zero by conflicting updates. Note, however, that a tuple is frozen by setting both HEAP_XMIN_INVALID and HEAP_XMIN_COMMITTED; this is a critical update and accordingly requires diff --git a/src/backend/storage/ipc/procarray.c b/src/backend/storage/ipc/procarray.c index e5d487d..d41a79f 100644 --- a/src/backend/storage/ipc/procarray.c +++ b/src/backend/storage/ipc/procarray.c @@ -388,7 +388,7 @@ ProcArrayRemove(PGPROC *proc, TransactionId latestXid) * ProcArrayEndTransaction -- mark a transaction as no longer running * * This is used interchangeably for commit and abort cases. The transaction - * commit/abort must already be reported to WAL and pg_clog. + * commit/abort must already be reported to WAL and pg_xact. * * proc is currently always MyProc, but we pass it explicitly for flexibility. * latestXid is the latest Xid among the transaction's main XID and @@ -1180,7 +1180,7 @@ TransactionIdIsInProgress(TransactionId xid) * At this point, we know it's either a subtransaction of one of the Xids * in xids[], or it's not running. If it's an already-failed * subtransaction, we want to say "not running" even though its parent may - * still be running. So first, check pg_clog to see if it's been aborted. + * still be running. So first, check pg_xact to see if it's been aborted. */ xc_slow_answer_inc(); diff --git a/src/backend/utils/time/tqual.c b/src/backend/utils/time/tqual.c index 26a3be3..41e89e1 100644 --- a/src/backend/utils/time/tqual.c +++ b/src/backend/utils/time/tqual.c @@ -13,9 +13,9 @@ * NOTE: When using a non-MVCC snapshot, we must check * TransactionIdIsInProgress (which looks in the PGXACT array) * before TransactionIdDidCommit/TransactionIdDidAbort (which look in - * pg_clog). Otherwise we have a race condition: we might decide that a + * pg_xact). Otherwise we have a race condition: we might decide that a * just-committed transaction crashed, because none of the tests succeed. - * xact.c is careful to record commit/abort in pg_clog before it unsets + * xact.c is careful to record commit/abort in pg_xact before it unsets * MyPgXact->xid in the PGXACT array. That fixes that problem, but it * also means there is a window where TransactionIdIsInProgress and * TransactionIdDidCommit will both return true. If we check only @@ -29,7 +29,7 @@ * * When using an MVCC snapshot, we rely on XidInMVCCSnapshot rather than * TransactionIdIsInProgress, but the logic is otherwise the same: do not - * check pg_clog until after deciding that the xact is no longer in progress. + * check pg_xact until after deciding that the xact is no longer in progress. * * * Summary of visibility functions: diff --git a/src/bin/initdb/initdb.c b/src/bin/initdb/initdb.c index 385e808..72a60ee 100644 --- a/src/bin/initdb/initdb.c +++ b/src/bin/initdb/initdb.c @@ -196,7 +196,6 @@ static const char *backend_options = "--single -F -O -j -c search_path=pg_catalo static const char *const subdirs[] = { "global", "pg_wal/archive_status", - "pg_clog", "pg_commit_ts", "pg_dynshmem", "pg_notify", @@ -213,6 +212,7 @@ static const char *const subdirs[] = { "pg_tblspc", "pg_stat", "pg_stat_tmp", + "pg_xact", "pg_logical", "pg_logical/snapshots", "pg_logical/mappings" diff --git a/src/bin/pg_upgrade/exec.c b/src/bin/pg_upgrade/exec.c index 55a6f0d..b242e30 100644 --- a/src/bin/pg_upgrade/exec.c +++ b/src/bin/pg_upgrade/exec.c @@ -309,6 +309,12 @@ check_data_dir(ClusterInfo *cluster) check_single_dir(pg_data, "pg_xlog"); else check_single_dir(pg_data, "pg_wal"); + + /* pg_clog has been renamed to pg_xact in post-10 cluster */ + if (GET_MAJOR_VERSION(cluster->major_version) < 1000) + check_single_dir(pg_data, "pg_clog"); + else + check_single_dir(pg_data, "pg_xact"); } diff --git a/src/bin/pg_upgrade/pg_upgrade.c b/src/bin/pg_upgrade/pg_upgrade.c index 90c0720..9c475df 100644 --- a/src/bin/pg_upgrade/pg_upgrade.c +++ b/src/bin/pg_upgrade/pg_upgrade.c @@ -47,7 +47,7 @@ static void prepare_new_cluster(void); static void prepare_new_databases(void); static void create_new_objects(void); -static void copy_clog_xlog_xid(void); +static void copy_xact_xlog_xid(void); static void set_frozenxids(bool minmxid_only); static void setup(char *argv0, bool *live_check); static void cleanup(void); @@ -113,7 +113,7 @@ main(int argc, char **argv) * Destructive Changes to New Cluster */ - copy_clog_xlog_xid(); + copy_xact_xlog_xid(); /* New now using xids of the old system */ @@ -374,17 +374,17 @@ remove_new_subdir(char *subdir, bool rmtopdir) * Copy the files from the old cluster into it */ static void -copy_subdir_files(char *subdir) +copy_subdir_files(char *old_subdir, char *new_subdir) { char old_path[MAXPGPATH]; char new_path[MAXPGPATH]; - remove_new_subdir(subdir, true); + remove_new_subdir(new_subdir, true); - snprintf(old_path, sizeof(old_path), "%s/%s", old_cluster.pgdata, subdir); - snprintf(new_path, sizeof(new_path), "%s/%s", new_cluster.pgdata, subdir); + snprintf(old_path, sizeof(old_path), "%s/%s", old_cluster.pgdata, old_subdir); + snprintf(new_path, sizeof(new_path), "%s/%s", new_cluster.pgdata, new_subdir); - prep_status("Copying old %s to new server", subdir); + prep_status("Copying old %s to new server", old_subdir); exec_prog(UTILITY_LOG_FILE, NULL, true, #ifndef WIN32 @@ -399,10 +399,16 @@ copy_subdir_files(char *subdir) } static void -copy_clog_xlog_xid(void) +copy_xact_xlog_xid(void) { - /* copy old commit logs to new data dir */ - copy_subdir_files("pg_clog"); + /* + * Copy old commit logs to new data dir. pg_clog has been renamed to + * pg_xact in post-10 clusters. + */ + copy_subdir_files(GET_MAJOR_VERSION(old_cluster.major_version) < 1000 ? + "pg_clog" : "pg_xact", + GET_MAJOR_VERSION(new_cluster.major_version) < 1000 ? + "pg_clog" : "pg_xact"); /* set the next transaction id and epoch of the new cluster */ prep_status("Setting next transaction ID and epoch for new cluster"); @@ -432,8 +438,8 @@ copy_clog_xlog_xid(void) if (old_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER && new_cluster.controldata.cat_ver >= MULTIXACT_FORMATCHANGE_CAT_VER) { - copy_subdir_files("pg_multixact/offsets"); - copy_subdir_files("pg_multixact/members"); + copy_subdir_files("pg_multixact/offsets", "pg_multixact/offsets"); + copy_subdir_files("pg_multixact/members", "pg_multixact/members"); prep_status("Setting next multixact ID and offset for new cluster"); diff --git a/src/include/access/slru.h b/src/include/access/slru.h index 5fcebc5..96a1e44 100644 --- a/src/include/access/slru.h +++ b/src/include/access/slru.h @@ -76,7 +76,7 @@ typedef struct SlruSharedData /* * Optional array of WAL flush LSNs associated with entries in the SLRU * pages. If not zero/NULL, we must flush WAL before writing pages (true - * for pg_clog, false for multixact, pg_subtrans, pg_notify). group_lsn[] + * for pg_xact, false for multixact, pg_subtrans, pg_notify). group_lsn[] * has lsn_groups_per_page entries per buffer slot, each containing the * highest LSN known for a contiguous group of SLRU entries on that slot's * page. @@ -120,7 +120,7 @@ typedef struct SlruCtlData SlruShared shared; /* - * This flag tells whether to fsync writes (true for pg_clog and multixact + * This flag tells whether to fsync writes (true for pg_xact and multixact * stuff, false for pg_subtrans and pg_notify). */ bool do_fsync; -- 2.10.1