Re: Connection Problem

From: Radosław Smogura <rsmogura(at)softperience(dot)eu>
To: Rob Stone <robstone(at)mira(dot)net>
Cc: Dave Cramer <pg(at)fastcrypt(dot)com>, Oliver Jowett <oliver(at)opencloud(dot)com>, pgsql-jdbc(at)postgresql(dot)org
Subject: Re: Connection Problem
Date: 2010-12-10 09:38:21
Message-ID: 20101210043821.154256pztiixveod@softperience.eu
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-jdbc

Hi,

I think you have badly configured routing table, I don't see there
loopback routing (lo device)
You should have line like this (lo - ended, 3rd line).

217.118.24.64 0.0.0.0 255.255.255.192 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 217.118.24.65 0.0.0.0 UG 0 0 0 eth0

I believe that you can connect to postmaster at IP 187.65.254.157 (if
it's not your dynamic address). After calling
route add -net 127.0.0.0
you should connect as well.

Check if you started all network interfaces at boot. Linux
distributions makes its different, you will need to call
/etc/init.d/*.lo or ifup lo from command line. Eventually check
/etc/sysconfig/network/ifcfg-lo there should be something like
STARTMODE=onboot

I really wonder how you connect to http://localhost if you don't have
route to it. I hope this helps you.

Kind regards,
Radosław smogura
http://softperience.eu
Cytowanie Rob Stone <robstone(at)mira(dot)net>:

> Hi Radek,
>
> Output from those commands attached.
>
> I always completely shutdown my laptop and pull the plug. So, it is
> doing a complete cold boot each time.
>
> When I try connecting to the database with ExecuteQuery, the same error
> is returned for both "localhost" and 127.0.0.1, when entering those
> values as the "host" on the connection dialogue.
>
> Via a browser, if I access http://localhost it returns the "It Work's!"
> output from apache.
>
> Thanks to everybody for your help.
>
> Cheers,
> Rob
>
>
>
> On Thu, 2010-12-09 at 15:43 -0500, Radosław Smogura wrote:
>> Hi,
>>
>> Check with netstat -atnp (it shows the process associated with port),
>> but psql should be there.
>>
>> Do route -n to see routing traces, execute ifconfig next.
>>
>> But this can be kernel driver problem. Do you "shut down" laptop by
>> closing it, I mean do you put it in sleep mode? Maybe you need to
>> restart network interfaces instead.
>>
>> On my PC when I put it on sleep mode, SATA controller doesn't wakes up.
>>
>> Kind regards,
>> Radek Smogura
>> > Rob,
>> >
>> > Have you tried 127.0.0.1 instead of localhost ? It's not that it isn't
>> > listening, the problem is there is no route to localhost which seems
>> > strange on it's own.
>> >
>> > Dave
>> >
>> > On Thu, Dec 9, 2010 at 8:18 AM, Rob Stone <robstone(at)mira(dot)net> wrote:
>> >> Hi Oliver,
>> >>
>> >> Thanks for the reply.
>> >>
>> >> Output from netstat shows port 5432 as being listened. Don't know what
>> >> to try next.
>> >>
>> >> Sometimes when I shut down my laptop the "stop" messages are displayed.
>> >> I noticed last night that pg_ctl could not find the postmaster.pid file,
>> >> even though PGHOST and PGDATA variables are set. I'm starting it with
>> >> the -i and -D options with -D pointing explicitly to the PGDATA path
>> >> using the full path name. Could not finding a postmaster.pid file be
>> >> linked in any way with my problem??
>> >>
>> >>
>> >> Cheers,
>> >> Rob
>> >>
>> >> rob(at)roblaptop:~> netstat -ln --tcp
>> >> Active Internet connections (only servers)
>> >> Proto Recv-Q Send-Q Local Address Foreign Address
>> >> State
>> >> tcp 0 0 0.0.0.0:22 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 127.0.0.1:631 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:5432 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:58112 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:2049 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:44739 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:6566 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:60135 0.0.0.0:*
>> >> LISTEN
>> >> tcp 0 0 0.0.0.0:111 0.0.0.0:*
>> >> LISTEN
>> >> tcp6 0 0 :::22 :::*
>> >> LISTEN
>> >> tcp6 0 0 ::1:631 :::*
>> >> LISTEN
>> >> tcp6 0 0 :::5432 :::*
>> >> LISTEN
>> >> tcp6 0 0 :::6566 :::*
>> >> LISTEN
>> >> tcp6 0 0 :::80 :::*
>> >> LISTEN
>> >> rob(at)roblaptop:~>
>> >>
>> >>
>> >>
>> >>
>> >> On Wed, 2010-12-08 at 08:52 +1300, Oliver Jowett wrote:
>> >>> On 08/12/10 02:29, Rob Stone wrote:
>> >>>
>> >>> > Wrote a mickey mouse java class (testdbconn) to see if I could access
>> >>> > the database and read data from a table that has two rows.
>> See attached.
>> >>> > When it runs it displays the same SQL error code as ExecuteQuery --
>> >>> > 08001 -- which is the "can't connect error".
>> >>>
>> >>> You have a network configuration problem of some sort:
>> >>>
>> >>> > Caused by: java.net.SocketException: Network is unreachable
>> >>>
>> >>> (This isn't "connection refused", it's "I have no configured route to
>> >>> that address")
>> >>>
>> >>> Oliver
>> >>
>> >>
>> >>
>> >> --
>> >> Sent via pgsql-jdbc mailing list (pgsql-jdbc(at)postgresql(dot)org)
>> >> To make changes to your subscription:
>> >> http://www.postgresql.org/mailpref/pgsql-jdbc
>> >>
>> >
>> > --
>> > Sent via pgsql-jdbc mailing list (pgsql-jdbc(at)postgresql(dot)org)
>> > To make changes to your subscription:
>> > http://www.postgresql.org/mailpref/pgsql-jdbc
>> >
>>
>>
>
>

In response to

Responses

Browse pgsql-jdbc by date

  From Date Subject
Next Message Thomas Markus 2010-12-10 10:00:30 Re: Connection Problem
Previous Message Francesco Degrassi 2010-12-10 08:07:04 Postgresql XA prepare() method behaviour